Action djopt()

The different types of optimizations change your board in order to reduce the total trace length and via count. Each optimization is accessible using an argument, e.g. djopt(miter). The basic actions have to be run multiple times as each iteration will change the design making new changes possible for subsequent iterations with the same or other actions.

Click on the images to download the example .pcb design.

argument name description example in example out after 1st iteration
debumpify Looks for U-shaped traces (with 90 degree corners) that can be shortened or eliminated.
miter Replaces 90 degree corners with a pair of 45 degree corners, to reduce RF losses and trace length.
orthopull Looks for chains of traces all going in one direction, with more traces orthogonal on one side than on the other. Moves the chain in that direction, causing a net reduction in trace length, possibly eliminating traces and/or corners.
unjaggy Looks for corners which could be flipped to eliminate one or more corners (i.e. jaggy lines become simpler).
vianudge Looks for vias where all traces leave in the same direction. Tries to move via in that direction to eliminate one of the traces (and thus a corner).
viatrim Looks for traces that go from via to via, where moving that trace to a different layer eliminates one or both vias.
auto run all the above except miter; run them multiple times until there's no more change possible

argument name	description	example in	example out after 1st iteration
debumpify	Looks for U-shaped traces (with 90 degree corners) that can be shortened or eliminated.
miter	Replaces 90 degree corners with a pair of 45 degree corners, to reduce RF losses and trace length.
orthopull	Looks for chains of traces all going in one direction, with more traces orthogonal on one side than on the other. Moves the chain in that direction, causing a net reduction in trace length, possibly eliminating traces and/or corners.
unjaggy	Looks for corners which could be flipped to eliminate one or more corners (i.e. jaggy lines become simpler).
vianudge	Looks for vias where all traces leave in the same direction. Tries to move via in that direction to eliminate one of the traces (and thus a corner).
viatrim	Looks for traces that go from via to via, where moving that trace to a different layer eliminates one or both vias.
auto	run all the above except miter; run them multiple times until there's no more change possible