Export_xy is a configurable template based export plugin that prints text files. The output contains an optional header, then an optional block for each subcircuit and after each such subcircuit block an optional block for each terminal in that subcircuit. In pseudo-code:
print header_template
foreach subc in subcircuits {
print subc_template
foreach term in s.terminals {
print term_template
}
}
Templates can reference to the current term, the current subc and global properties (such as board properties).
Each xy export format has an user assigned ID (which is the short name of the format). There is a list of strings in the config tree under plugins/export_xy/templates; each item is named as ID.something where something is:
Templates are text strings; they are printed as is, keeping all newlines and whitespace. Portions in between % signs are substituted, depending on the context.
| keyword | description |
|---|---|
| %UTC% | current date and time in UTC |
| %author% | board author |
| %title% | board title |
| %suffix% | coordinate unit (mm or mil) |
| %boardw% | boward width (unit suffixed coord) |
| %boardh% | boward height (unit suffixed coord) |
| %subc.a.KEY% | paste the current subcircuit's attribute value of the attribute whose name matches KEY; print "n/a" for non-existing attributes |
| %subc.a.KEY|unk% | same as %subc.a.KEY% but print "unknown" instead of "n/a" |
| %subc.a.KEY?yes% | same as %subc.a.KEY% but print "yes" if attribute value represents true, "n/a" otherwise |
| %subc.a.KEY?yes:nope% | same as %subc.a.KEY% but print "yes" if attribute value represents true, "nope" otherwise |
| %subc.refdes% | print the refdes of the current subcircuit |
| %subc.refdes_% | print the cleaned refdes of the current subcircuit |
| %subc.footprint% | print the footprint name of the current subcircuit |
| %subc.footprint_% | print the cleaned footprint name of the current subcircuit |
| %subc.value% | print the value of the current subcircuit |
| %subc.value_% | print the cleaned value of the current subcircuit |
| %subc.x% | print the X coordinate of the origin of the subcircuit (coord with unit suffix) |
| %subc.y% | print the Y coordinate of the origin of the subcircuit (coord with unit suffix) |
| %subc.padx% | print the X coordinate calculated from padstacks of the subcircuit (coord with unit suffix) |
| %subc.pady% | print the Y coordinate calculated from padstacks of the subcircuit (coord with unit suffix) |
| %subc.pad_width% | print the total width calculated from padstacks of the subcircuit (coord with unit suffix) |
| %subc.pad_height% | print the total height calculated from padstacks of the subcircuit (coord with unit suffix) |
| %subc.pad_width_prerot% | print the total width calculated from padstacks of the subcircuit, before applying rotation (coord with unit suffix) |
| %subc.pad_height_prerot% | print the total height calculated from padstacks of the subcircuit, before applying rotation (coord with unit suffix) |
| %subc.rot% | print the subc rotation value in degrees |
| %subc.siderot% | print the subc rotation value in degrees, always looking from the top side, "x-ray mode" (relative to side) |
| %subc.270-rot% | print the subc rotation value in degrees, subtracted from 270 |
| %subc.side270-rot% | print the subc rotation value in degrees, always looking from the top side, "x-ray mode", subtracted from 270 (relative to side) |
| %subc.side% | "top" or "bottom" (determined by subc placement, the subc aux layer) |
| %subc.num-side% | "1" for top or "2" for bottom (determined by subc placement, the subc aux layer) |
| %subc.count% | integer value, incremented by one before processing each subcircuit |
| %subc.smdvsthru% | "SMD" if contains padstacks but no padstack with hole; "PTH" if contains padstack with hole; "0" if neither |
| %subc.smdvsthrunum% | "2" if contains padstacks but no padstack with hole; "1" if contains padstack with hole; "0" if neither |
| %subc.pincout% | "pin" or "pad" count. Do not use. |
| %term.netname% | name of the net the current terminal should be connected to according to the netlist; "NC" for no connection |
Cleaned means any character that is non-alphanumeric, not "." and not "-" and not "+" is replaced with "_".